Air sterilizer YAMATO SI401 (77 l)
Air sterilizer YAMATO SI401 (77 l) Easy to operate and operate, easy to install, dry heating sterilizer for the laboratory. Equipped with a new controller with various software functions. The Yamato Scientific SI401 sterilizer is used in medical institutions, epidemiological laboratories, pharmacies, research and medical institutions for disinfection and drying of various medical instruments and materials. The model is equipped with a spacious chamber with two outlets in the upper part, a securely locked sealed door and a convenient control panel with a simple interface. Series features: There is no need to add temperature rise time to the sterilization time. Equipped with a new standby function that counts down the time in a temperature range from 0 to 5 °C after reaching the set temperature, and then stops counting when the timer is turned off. This makes it easy to manage the sterilization time. In addition to timer functions such as auto start and auto stop, an auto program start function (starting a programmed job after a set time has elapsed) and a quick auto stop function (stopping while running) have been added. Security Features: Equipped with safety features such as heater shut-off, leakage breaker and automatic overheating prevention. Manba: https://www.nv-lab.ru/catalog_info.php?ID=7265
- Circulation method: Natural convection
- Operating temperature range, °C: Room temp. +5 - 260
- Temperature control accuracy, °C: 2 (at 260°C)
- Temperature distribution accuracy, °C: 20 (at 260°C)
- Time to reach max. temperature, min: Approximately 70
- Interior/Exterior: Stainless steel plate/Cold rolled steel sheet with chemical protective coating
- Insulation material: Fiberglass
- Heater: Nichrome heating wire / 1.2 kW
- Diameter of air outlet holes, mm: 30
- Temperature control: PID controller
- Temperature Setting: Use the dedicated menu function key and up/down key to set the temperature
- Timer: 1 min - 99 h 59 min and 100 h - 999 h 50 min (with timeout function)
- Control functions: Fixed temperature operation, Automatic start, Fast automatic stop, Automatic program start
- Program mode: 6 patterns (30 steps × 1, 15 steps × 2, 10 steps × 3)
- Additional features: Calibration offset, key lock, power failure compensation
- Sensor: K-thermocouple (temperature controller and overheat protection)
- Safety device: Self-diagnosis circuit (abnormal temperature detection, heater shutdown, automatic overheating prevention, solid state relay short circuit)
- Max. load on shelf, kg: 15
- Number of recesses for shelves/Distance, mm: 10/30
- Shelf Material: Stainless Stamping Metal
- Number of shelves/brackets: 2/4
- Internal dimensions, mm: 450×430×400
- External dimensions, mm: 550×540×777
- Internal volume, l: 77
- Power Supply: AC115/AC220V Single Phase
- Weight, kg: 42