Vibrodrive Vibrotechnik VPS M
Vibrodrive Vibrotechnik VPS M Designed to impart strictly vertical vibrations to technological equipment or a column of sieves used in sieve analysis - separation of bulk materials by particle size. The control system allows you to set the platform oscillation amplitude and cycle duration in periodic operating mode. Can be supplied as a stand-alone product or as part of analyzers. Suitable for all sizes of sieves: sieves with a diameter of 120 mm, 200 mm and 300 mm can be installed on the vibrating drive platform. The vibration drive can be used as a vibrating table with a platform load of up to 10 kg. Device Description The Vibration Drive includes: a housing, a platform, springs and an electromagnet. The platform is made in the form of a round plate and is installed on the body through four springs. An electromagnet armature is installed on the lower surface of the platform. Inside the housing there is an electromagnet, a platform position sensor, an inverter and a control system. Operating principle When the Vibration Drive is started, alternating current flows through the electromagnet winding. The resulting alternating electromagnetic field acts on an anchor fixed to the platform, which makes vertical reciprocating movements, transmitting vibrations to the platform. The oscillation frequency depends on the mass of the technological equipment elements fixed on the platform and the mass of the loaded material - the number of sieves and the mass of the sample. Due to its small dimensions and energy consumption, as well as connection to a 220 V network, it is suitable for laboratory use. The design of the vibration drive does not contain wear parts and components. The platform position sensor and feedback system ensure compliance between the specified and actual vibration amplitudes. To move the vibration drive, two handles are provided in the housing. The platform has two M10 threaded holes for installing the sieve mounting device. Digital control: an electromagnetic drive, consisting of a coil and an armature, allows you to adjust the amplitude of platform vibrations from 0.1 mm to 2 mm in increments of 0.1 mm; the operating time of the vibration drive is set; During operation of the vibration drive, the set parameters are displayed on the control panel. Manba: https://www.nv-lab.ru/catalog_info.php?ID=10399
- Parameter: Value
- Total payload of the load on the platform, kg, no more than: 10*
- Amplitude (oscillation range) of the platform, mm: 0.2 – 4.0
- Platform oscillation frequency, number/min: 900 – 1800**
- Settable operating time, hour:min: 0:01-0:30; unlimited
- Dust and moisture protection degree: IP65
- Overall dimensions (L × W × H), mm, no more: 400 × 360 × 180
- Weight, kg, no more: 45
- Drive power, W: 10
- Power supply from AC mains (voltage, V / frequency, Hz): 220;
- 50