Scales CAS series CUX, CUW
The scales of the CUX and CUW models use the Japanese "UniBlock" sensor manufacturing technology. The traditional assembly of the scale load cell is replaced by the installation of a single unit made of aluminum alloy, operating on the principle of electromagnetic compensation. Thanks to this, there are many advantages when using scales: fast sensor response when exposed to load, high level of stability, durability. 3 YEAR WARRANTY! Automatic adaptive calibration using a built-in weight allows the scale to automatically adapt to environmental changes. Automatic calibration at certain specified time intervals (up to 3 per day). Automatic calibration by simply pressing one key. By using one-pass calibration, the calibration process time is significantly reduced. The built-in clock allows you to record the date and time of calibration for subsequent reporting. Weighing results are entered into the PC memory as plain text (at the cursor location) without the use of special software. Basic RS-232C data exchange interface. The counting mode is used to determine the number of products by weight. The graphic load scale shows the weight graphically. The number of scale divisions changes in proportion to the change in mass of the load. You can enter the gravitational acceleration value for the location of operation and calibration. Weighing mode based on tolerance according to the indicators LOW, NORMAL, A LOT without reading indicators. Accuracy classes according to GOST 24104-2001: models CUW620HV, CUW6200HV – special; models CUW420S, CUW4200S, CUX420S, CUX4200S – medium; other models – high • Automatic zero setting • Sampling of tare weight from • Accuracy classes according to GOST 24104-2001: models CUW620HV, CUW6200HV – special; models CUW420S, CUW4200S, CUX420S, CUX4200S – medium; other models – high Automatic zero setting Sampling tare weight from weighing range Operating modes: weighing (including percentage), counting the number of identical parts, averaging readings under unstable load, tolerance weighing Measuring the density of solids and liquids using hydrostatic weighing (measurements require a suspended cup in which the weight is placed and a container for the liquid) See. Density Measuring Kit SMK-401 Built-in pallet hook Scale calibration: external (CUX models) or internal with built-in weight (CUW models) Select from a range of weighing units Automatic shutdown when not working Membrane keyboard Display is easy to read Stainless steel platform Built-in WindowsTM software Compliance with GLP, GMP, ISO9000 standards Operating temperature range: -10 ~ 30°C (CUW420H, CUW620HV, CUW6200 HV, CUW820S, CUW2200H, CUW4200H, CUW 8200S); -5 ~ 40°С – other models OptionsBattery pack (up to 15 hours of battery life). Specifications Model CUW-420H, CUX-420H, CUX-620H CUW-620HV CUW-6200 HV, CUX-6200H CUW-420S, CUX-420S CUW-820S, CUX-820S CUW-2200H, CUX-2200H CUW-4200H, CUX-4200H CUW-4200 S, CUX-4200 S CUW-8200 S, CUX-8200 S Maximum weighing limit, g 420 / 620 620 6200 420 820 2200 4200 4200 8200 Minimum weighing limit, g 0.02 0.1 1/0.5 0.2 0.5 0.5 0.5 2 5 Readout resolution, g 0.001 0.01 0.1 Verification division price, g 0.01 0.1 1 Repeatability, g, no more 0.001 0.01 0.008 0.08 Nonlinearity, g, no more 0.002 0.02 0.01 0.1 Measurement type Electromagnetic compensation Food from the network 220 V / 50 Hz, from a remote autonomous source of 12 V (optional) Operating temperature range, °C For CUX models: 5 ~ 40, for CUW models: 10 ~ 30 Display type LCD with backlight Interface RS-232C Stabilization time, sec, no more 1.5~2.5 0.7~1.2 Platform dimensions, mm 108×105 (if the LEL is not more than 2.2 kg), 170×180 (if the LEL is not less than 2.2 kg) Overall dimensions, mm 190×317×78 Weight, kg, no more 3.4 kg for CUW- and 2.7 kg for CUX (if the LEL is not more than 2.2 kg), 4.6 kg for CUW- and 2.9 kg for CUX (if the LEL is not less than 2.2 kg) Manba: https://www.nv-lab.ru/catalog_info.php?ID=2049