Power amplifier Biamp PA2240BP Apart
Apart PA2240BP is a high-quality two-channel broadcast power amplifier, 2 x 240 W, 480 W in bridge mode. Each amplifier channel has 100, 70, 50 and 35 V outputs, 4 Ohm outputs are provided for connecting low-impedance speakers (8 Ohm output in bridge mode). The amplifier has 2 balanced line inputs and 2 priority line inputs. Priority inputs are activated by dry contacts; when a signal arrives at the priority inputs, signals arriving at the normal inputs are suppressed. Also, when priority inputs are activated, +24V DC voltage appears at the terminals on the rear wall of the device (separately for each channel). This function can be used to connect attenuators with bypass relays or for other purposes. The signal level of the linear and priority inputs is adjustable on the rear panel of the amplifier, where you can also adjust the frequency characteristics of the input signals for each channel. On the front panel of the amplifier there are indicators of the amplifier operating modes. The device is powered by 220V AC and 24V DC. The delivery set includes mounting brackets for installing the amplifier in an equipment cabinet or 19" rack.
- Frequency response (Hz): 35 - 22k
- Low impedance output: Yes
- Output power, 100V (W): 2 x 240
- Output power, 4 ohms (W): 2 x 240
- Output power, 8 ohms (W): 2 x 120
- Bridged Output Power (W): 480
- Minimum load impedance (ohms): 4
- Gain channels: 2
- Line balanced inputs: 2
- Tone control: Yes
- Dry contact: Yes
- Priority signal output: Yes
- Cooling system: Fan
- Volume control: Rear panel
- 19" Rack Mount: Yes
- Height (U): 2
- Supply voltage (VAC): 230
- Emergency power (VDC): 24
- 100V output: Yes
- Max. power consumption (W): 1050
- Warranty: 12 months.
- Depth (mm): 420
- Dimensions: 412 x 430 x 88 mm (without “snake”)
- Weight: 22 kg