Automatic steam sterilizer VKA-75 PZ
Automatic steam sterilizer VKA-75 PZ Designed for sterilization with saturated water steam under excess pressure of medical products made of metal (surgical instruments, etc.), glass (dishes, etc.), rubber (surgical gloves, etc.), plastic, as well as dressings and ligature suture materials, products made of textile materials (surgical linen, etc.), the effect of steam on which does not cause changes in their functional properties. Preliminary removal of air from the sterilization chamber is carried out by a combined method, including the gravitational method ("Blowing") and pulsating pumping ("Vacuum") through the use of a condenser. The sterilizer has a reusable filter for bacterial purification of air admitted into the sterilization chamber after vacuum drying. The number of sterilization boxes of type KSKF-18, simultaneously loaded into the chamber – 3 pcs. (supplied by separate order). Scope of application: The sterilizer is intended for use in central sterilization departments, sterilization departments in operating rooms, and in hospital departments. Benefits: preliminary vacuum ensures effective removal of air from the chamber, and, consequently, maximum saturation with steam and its penetration into products of complex shape and texture; precise control of autoclave parameters and functions; full automation of the sterilization process; possibility of programming sterilization cycle parameters; the ability to change the parameters of the sterilization mode (temperature, time), pre-vacuum stage, drying time allows users to flexibly control all parameters of the sterilization process, depending on the products being sterilized; central seal of the vessel lid; the sterilizer is equipped with an interface connector for connecting to a computer; microprocessor control provides constant and most accurate control of the parameters and functions of the autoclave. all elements of the sterilizer vessel, except for seals, pipelines and fittings, are made of corrosion-resistant steel, the inner surface of the chamber is processed by electrochemical polishing; All elements of the sterilizer comply with GOST 31598: - resistant to steam and condensate; - do not affect the quality of steam; - do not emit toxic substances in concentrations exceeding the maximum permissible concentration (MPC). Manba: https://www.nv-lab.ru/catalog_info.php?ID=360
- Parameter: Value
- Camera type: round
- Useful chamber volume, l: 75
- Maximum operating pressure, MPa: 0.22
- Pressure maintenance accuracy, MPa: ±0.01
- Volume of distilled water poured in when starting the sterilizer for the first time, l: 35
- Residual moisture content of sterile textile materials, %, not more than: 1
- Internal dimensions of the chamber (Ø × D), mm: 400 × 674
- External dimensions (W × D × H), mm: 540 × 686 × 1185
- Weight, kg: 150
- Power consumption, kW, no more: 6.5
- Power, V/Hz: 380/50
- Specified temperature conditions, °C: 134 °C – 5 min;
- 121 °C – 20 min;
- 126 °C – 10 min
- Sterilizer heating time, min, no more than: 60
- Maximum temperature deviation in the loaded chamber from the nominal value, °C, no more than: ±1
- Continuous operation time per day, h, not less: 16
- MTBF, cycles, not less: 1000
- Average service life, years: 10