Gynecological chair KG-2
Gynecological chair KG-2 The gynecological chair KG-2 is intended for placing women on it during gynecological examinations, various procedures, as well as minor surgical interventions. The frame of the chair is welded, made of square steel pipes coated with an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine. The soft elements of the back and pelvic sections are made of polyurethane foam (thickness 50 mm) and covered with vinyl leather. The knee pads are made of steel profile, covered with a hygienic cover made of vinyl artificial leather with a polyurethane foam gasket. The knee pads are equipped with straps that secure the lower leg. The knee pads are installed in guide bushings on the seat frame, adjusted in height and then fixed using clamps. The basin (for collecting liquid) is made of stainless steel. The basin is installed in a cassette located under the base of the pelvic section of the chair. When changing the angle of the seat, the basin always remains in a horizontal position and does not interfere with the patient’s seating in the chair. The footrest is rotatable and fixed to the base frame. The chair is equipped with a foot section. The base is mounted on 4 adjustable supports. The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate. Floor seat height - fixed - 915 mm. The tilt angles are adjusted using the Rastomat mechanism: seats from horizontal...................................................14°; backrest from vertical ...................................................45°. Standard equipment knee pads (2 pcs.) footrest foot section stainless steel basin palm rests (2 pcs.) Length (from footrest to backrest when unfolded), mm 1641 Seat width, mm 590 Seat height, mm 915 Product weight, kg 50 Gross weight (without lathing), kg 86.5 Permissible load (no more), kg 170 Manba: https://www.nv-lab.ru/catalog_info.php?ID=2286