Gynecological chair KG-1
The gynecological chair KG-1 is intended for placing women on it during gynecological examinations, various procedures, as well as minor surgical interventions. The frame of the chair is made of round steel pipe coated with an environmentally friendly polymer powder coating that is resistant to repeated treatment with disinfectant solutions used in medicine. Removable devices are made of round steel pipe with galvanic protective and decorative coating. The soft elements of the back and pelvic sections are made of polyurethane foam (thickness 10 mm) and covered with vinyl leather. The knee pads are made of steel profile, covered with a hygienic cover made of vinyl artificial leather with a polyurethane foam gasket. The knee pads and hand rests are installed in guide bushings on the seat frame, adjusted in height and then fixed using clamps. The basin (for collecting liquid) is made of stainless steel. The basin is installed in a cassette located under the base of the pelvic section of the chair. When changing the angle of the seat, the basin always remains in a horizontal position and does not interfere with the patient’s seating in the chair. The footrest is rotatable and fixed to the base frame. The base is mounted on 2 rollers and 2 supports. The chair is delivered assembled in corrugated cardboard packaging and/or in a wooden crate. Seat height above the floor - fixed, mm......... 900. The tilt angles are adjusted using a manual drive: - seats from horizontal...................................................from 0° to 20°; - backrests from vertical...................................................from 0° to 100°. Standard equipment knee pads (2 pcs.) step stainless steel basin palm rests (2 pcs.) Length, mm 1120 Seat width, mm 500 Seat height, mm 900 Height (total), mm 1640 Product weight, kg 45 Gross weight (without lathing), kg 48.5 Permissible load (no more), kg 180 Dimensions of corrugated cardboard packaging, mm 850x515x1650, volume, cubic m - 0.72 Dimensions of wooden sheathing, mm 950x615x1750, volume, cubic m - 1.02 Manba: https://www.nv-lab.ru/catalog_info.php?ID=2285