Conductivity meter MARK-603 (portable)
Conductivity meter-salin meter MARK-603 (0-2000 µS/cm). The conductometer is designed to measure specific electrical conductivity (SEC), mass concentration of salt of aqueous solutions in terms of NaCl, temperature of water and aqueous solutions. The conductometer allows you to measure absolute electrical conductivity and electrical conductivity normalized to 25 °C and carry out operational monitoring of water chemical conditions at thermal power engineering facilities. Double thermal compensation is provided. First, thermal compensation of the UEP component of absolutely pure water is carried out, and then thermal compensation of the UEP component caused by substances dissolved in water (compensation for the linear law of change in conductivity). The DP-015 conductivity sensor is equipped with a non-volatile memory chip, in which all parameters are initially recorded. All results are displayed on a backlit graphic indicator. The device can operate continuously on AA batteries. The conductivity meter has built-in software (software). The device allows you to record the results of up to 500 measurements in an electronic notepad. Features: double automatic temperature compensation (ATC), allows for highly accurate measurements of the conductivity of “ultrapure” water, choice of temperature compensation coefficient as desired, flow-immersion sensor made of stainless steel, electronic notepad, USB port, software included. Manba: https://www.nv-lab.ru/catalog_info.php?ID=5369
- Feature: Parameter
- UEP, µS/cm: 0-2000
- 0-20000
- Salt content, mg/dm3: 0-1000
- 0-10000
- TDS, mg/dm3: from 0 to 2000
- from 0 to 20000
- Temperature, °C: 0-75
- UEP, µS/cm: 0.001
- Salt content, mg/dm3: 0.001
- TDS, mg/dm3: 0.001
- Temperature, °C: 0.1
- UEP, µS/cm: ±(0.003+0.015×æ)
- ±(0.05+0.015×æ)
- Salt content, mg/dm3: ±(0.004+0.02С)
- ±(0.06+0.02С)
- TDS, mg/dm3: ±(0.006+0.03С)
- ±(0.1+0.03С)
- Temperature, °C: ±0.3
- converter block: 65×130×28
- DP sensor 015, Ø: 15×130
- DP sensor 15, Ø: 15×160
- converter unit: 120
- sensor DP 015, Ø: 70
- DP sensor 15, Ø: 110
- Port: USB
- Power supply: from two AA elements
- from two AA batteries
- from 220 V mains (via power supply)