Oceanika Kit underwater robotics kit
Oceanika KIT is your smart robot capable of working in sea and fresh water. Full control of the underwater robot is carried out using the control panel, which is supplied in the kit. When controlling, you can control the speed of movement of the robot underwater (3 speed modes). The design already has built-in sensors: six-axis gyroscope-accelerometer; three-axis magnetic compass; pressure sensor, temperature sensor. The robot will always signal if connection is lost or inactivity for more than 5 minutes, and will also float to the surface of the water if connection is lost. The basis of the underwater robot Oceanika Whale is a Raspberry Pi3 microcomputer. Oceanika Whale will give you unforgettable emotions and allow you to explore the underwater world even more interesting. Capable of diving to a depth of up to 5 meters, both in fresh and salt water Record video and take photos underwater on a mobile device and save it in memory Take pictures with a resolution of 8 megapixels and record FullHD video Possibility of turning on/off powerful flashlights with brightness adjustment Five motors allow you to move in 6 directions: up, down, forward, backward, right and left Transfer data on the state of the robot systems to the display of your mobile device Collect items, lift iron objects, monitor water conditions Move underwater at three different speeds of your choice Take photos and videos underwater and simultaneously view the resulting images Maintain a connection with a mobile device at a distance of up to 30 meters
- Contents: More than 200+ different parts in a box Control panel - 1 pc. Hermobox - 1 pc. External navigation module - 1 pc. Communication buoy - 1 pc. Motors - 5 pcs. Charger - 1 pc. Floats - 2 pcs.
- Immersion depth: 5 meters
- Maximum speed: 1.5 m/s
- Working time: 60 minutes
- Processor: ARM Cortex-A53 processor
- Photo-video camera: FullHD
- Control panel (Underwater robot control): 1 pc.
- Operating systems (Underwater robot control): Raspbian or ROS
- Mobile application (Control of an underwater robot): Oceanika Nav (Android, IOS)
- Camera Type (Camera): CMOS
- Viewing Angle (Camera): 120 degrees
- Mount (Camera): Fixed
- Tilt angle to horizon (Camera): 0 degrees
- Resolution (Camera): 720p (1280x720) - FullHD
- Quantity (Camera): 1 piece
- Flashlights (Lighting): 2 x 100 lumens
- Beam Angle (Illumination): 140 degrees
- Energy (Lighting): Powered by drone
- Location (Lighting): Anywhere
- Type (Motor): Brushless, Removable
- Quantity (Engine): 5 pcs.
- Speed (Engine): up to 3000
- Voltage (Motor): 12 volts
- Peak Current (Motor): 30 amps
- Communication (Communication Buoy): Wi-Fi
- Wi-Fi range (Communication buoy): 30 m
- Dimensions: (Hermobox): 18 cm x 7.8 cm x 4.7 cm
- Electrical connectors: (Hermobox): 5 pcs - 4Pin, 2 pcs - 2Pin, 1 pcs - 7Pin, 1 pcs - 6Pin
- Capacity (Battery): 56 Wh
- Operating time (Battery): 60 min
- Charging time (Battery): 3 hours
- Power Source Type (Battery): Li-Po
- Diameter (Communication Cable): 5mm
- Length (Communication cable): 5m
- (Communication cable): 6-core silicone sheathed cable
- Operator: 1 person to launch/lift, control the robot
- Control panel: photo shooting modes, video recording modes, motor locking/unlocking, depth and pitch fixation, light on/off, brightness adjustment (3 brightness modes), speed change (3 speed modes), signal when connection is lost/inactivity for more than 5 minutes, surfacing when connection is lost
- Sensors: Pressure and temperature, Gyroscope-accelerometer six-axis, Magnetic compass three-axis
- Overall dimensions: 31 cm×26 cm×15 cm (Dimensional deviations are possible ±5%.)
- Total weight: 2 kg