Electronic stopwatch Integral S-02
Electronic stopwatch Integral S-02 Provides operation in two modes – “stopwatch” and “clock”. Mode selection and control in each mode are performed using the corresponding buttons. in the “stopwatch” mode, it is possible to store measurement results in memory (maximum number of measurements – 30), read and erase measurement results; In the “clock” mode, it is possible to reproduce a 24-hour time scale in hours, minutes and seconds. The operating principle of the stopwatch is based on the use of a quartz oscillator and a microprocessor, which ensures operation in all modes and displays measurement information on the LCD. The stopwatch can be supplied with Russian verification. Manba: https://www.nv-lab.ru/catalog_info.php?ID=9987
- Parameter: Value
- Limits of permissible basic absolute measurement error in stopwatch mode under normal operating conditions (25 ± 5) °C, s: ±(9.6 10-6 Tx+0.01) *
- Rated frequency of the quartz oscillator, Hz: 32768
- Relative error when setting the nominal frequency value of the quartz oscillator: ±1·10-6
- Limits of permissible additional absolute measurement error in stopwatch mode caused by deviation of ambient air temperature from normal conditions (25 ± 5) °C in the operating temperature range from minus 10 °C to plus 50 °C per 1 °C temperature change, s: -2.2 10-6 Tx
- Daily clock rate at air temperature (25 ± 5) °С, s/day: ±1.0
- Daily clock rate at air temperature (23 ± 2) °С, s/day: ±0.5
- Daily clock rate in the operating temperature range from 1 °C to 45 °C with the exception of the temperature range (25 ± 5) °C, s/day: ±2.5
- Daily clock rate when exposed to air humidity of no more than 80% at a temperature of 25 °C, s/day: ±3.0
- Restoration of daily cycle, s/day: ±0.5
- Time resolution, s: 0.01
- Estimated number, no more than: 1.6
- Overall dimensions (L × W × H), mm, no more: 58 × 77 × 22
- Weight, g, no more: 50
- Rated DC supply voltage, V: 3