Biochemical analyzer Stat Fax 1904+
Biochemical analyzer Stat Fax 1904 Compact biochemical analyzer Russified Open system for any methods and reagents Built-in printer Built-in thermostat for 12 holes Alphanumeric display Full kinetics with reaction plotting Automatic filter wheel (340, 405, 450, 505, 545, 600 nm) Single or multi-point calibration Non-volatile memory for 60 tests Saving Calibrations Mosquito flow cell reduces reagent consumption by half increases work productivity not required for Stat Fax 1904+ to work, used as an option aspiration volume range: 250 - 500 µl Flow cell chamber volume: 33 µl power supply: 12 V from analyzer Specifications Measurement linearity range 0.00 - 2.50 optical density units (A) Photometer accuracy + (1% of measurement + 0.005 A) at 0 - 1.5 A + (2% of measurement + 0.005 A) at 1.5 - 2 A Stability zero drift no more than 0.005A for 8 hours Light source halogen lamp with tungsten filament Filters (wavelengths) 340, 405, 450, 505, 545 and 600 nm Bandwidth at half maximum 10 nm Filter type interference Test tube size 12 mm, standard round Minimum volume 1 ml Maximum volume 2 ml (only for control 37°C) Temperature 37°C (+ 0.3°), the incubation unit is constantly on, the measuring cell can be turned on / off Lamp warm-up time - in kinetic mode 120 s - with MosquitoT flow cell 240 s - in other modes 45 s Cell warm-up time 20 - 30 min, depending on ambient temperature Warm-up time of the incubation block 20 - 30 min, depending on ambient temperature Automatic lamp shutdown time to save lamp after 15 minutes of inactivity, 30 minutes with MosquitoT Speed measurement, calculation and printing of results in 3 s Display alphanumeric, 16-digit, liquid crystal Printer thermal, 20 characters per line, 57 mm paper Keyboard 16 membrane keys, 4x4, with sound signal Calculation methods - single-point calibration by standard or factor - multi-point calibration (up to 7) - kinetics by standard or factor (single or multiple) - by fixed time Required fuses 120V - 0.6A, 3Ag, slow burn Housing plastic painted with fire-resistant enamel with a metal base Power supply - 110-120 or 220-240 V, 50/60 Hz, selectable switching - power consumption: less than 50 W - fuses: two 0.5 A, class T, 250 V Temperature, humidity 15 - 35°C, humidity less than 85% Dimensions, weight 24 x 34 x 10 cm, 4.5 kg Tests to run Enzymes: AST, ALT, gamma-GT, LDH, alpha-amylase, creatine kinase, creatine kinase MB-fraction, lipase, alkaline phosphatase, acid phosphatase, cholinesterase, GBDG, LAP, FGI Substrates: uric acid, albumin, direct and total bilirubin, creatinine, glucose, hemoglobin, lactate, total protein, microalbumin in urine, urea, protein in urine and CSF, fructosamine Lipids: cholesterol, HDL cholesterol, LDL cholesterol, triglycerides, phospholipids, total lipids Electrolytes: potassium, sodium, calcium, chlorides, iron, OZhSS, copper, magnesium, phosphorus, zinc Immunoturbidimetry of serum proteins: apolipoproteins A1, B, CII, CIII, E, alpha-1-antitrypsin, alpha-2-macroglobulin, alpha-1-acid glycoprotein, antithrombin III, ceruloplasmin, C-1-Esterase, complement C 3, complement C 4, haptoglobin, IgG, IgA, IgM, kappa (Ig light chains), lambda (Ig light chains), prealbumin, transferrin Latex immunoturbidimetry of serum proteins: C-reactive protein (CRP), rheumatoid factor (RF), antistreptolysin O (ASLO), lipoprotein (a) Lp(a), beta-2-microglobulin, ferritin, immunoglobulin E (IgE), myoglobin, microalbumin, alpha-fetoprotein, glycosylated hemoglobin Manba: https://www.nv-lab.ru/catalog_info.php?ID=775