Redistiller GFL-2104 (4 l/h)
Convenient to operate and maintain redistiller GFL-2104 Discontinued due to rebranding! Analog - Double distiller LAUDA PD 4 D Puridest. To manufacture the double-distiller GFL-2104, a combination of high-quality steel and glass is used. It does not have a storage tank. When full automation productivity is four liters of distillate per hour. Constructive execution and properties High quality distillate, the specific electrical conductivity of the monodistillate is about 2.2 μsm/cm at 25 °C; The specific electrical conductivity of double distillate is about 1.6 µS/cm at 25 °C. Capacitors are easily removed for access to the still and the first stage splash guard (for obtaining a monodistillate). Material: high quality stainless steel, material. Condensers (coolers): 1st steps made of high quality stainless steel; 2nd steps, including safety filter, made of Duran® glass / borosilicate glass 3.3. Tubular heating element, made of high quality stainless steel Water is supplied through a built-in the device has a magnetic valve with connection for water supply pressure hose 1/2 inch (internal Ø 12.7 mm) (pressure hose supplied separately). Required pressure cooling water: > min. 3 - max. 7 bar. After starting the device using the main switch, the magnetic valve opens the water supply. Cooling water discharge through hose connection 3/4 inch (internal Ø 19 mm). Unevaporated water is removed through the cooling water drain (the water drainage hose is supplied separately). Energy savings through distillation heated cooling water Selection of distillate: monodistillate - via borosilicate glass drain tap with Teflon stopper, bidistillate - free outlet with dust cap made of borosilicate glass 3.3. Triggered protective devices in case of lack of water: float switch and safety thermal switch Electronic control device contamination switches off the apparatus if the water in the distillation cube is excessively contaminated 1st stage, and the red “Cleaning” signal light comes on. Removal of carbon dioxide through outlet tubes on condensers. Main switch and indicator - lamps for monitoring both stages of distillation are located on the front device panel. Two-piece outer the housing is made of electrolytically galvanized steel sheet with electrostatic powder coating with epoxy resin; upper part removable thanks to quick release connections. Connection to the power source via supply cable. Technical characteristics of double distiller GFL-2104 Productivity, l/h 4 Storage tank volume, l - Cooling water flow, l/h - approx. 120 Overall dimensions mm, L x W x H 550x280x570 Power supply 400 V / 50...60 Hz / 6.5 kW, three-phase current Weight, kg, net/gross 23/35 Packaging volume - box, m³ 0.34 Manba: https://www.nv-lab.ru/catalog_info.php?ID=2532