Automatic titrator Aquilon ATP-02
Automatic titrator Aquilon ATP-02 Aquilon ATP-02 is an automatic high-precision potentiometric titrator. The device meets all the requirements for this class of equipment: continuous and discrete supply of titrant (range from 0.1 to 36 ml/min - with a dosing device volume of 20 ml; and from 0.25 to 90 ml/min - with a dosing device volume of 50 ml), automatic change in feed rate as it approaches the equivalence point or a given point, etc. The device allows titration using the following methods: general method of potentiometric titration; acid-base titration; titration by precipitation method; titration using the complexation method; photometric titration (optional), etc. These titration methods make it possible to determine acid and alkaline numbers, the content of S, Cl, Pb and other substances in petroleum products, mineral and edible oils and other food products, drinking, natural, wastewater, soils, sediments, sludge, activated sludge, bottom sediments, atmospheric air and work area air, pulp and paper products, lime, alloys, ores, mineral fertilizers, forest chemical products, etc. in accordance with GOST and other regulatory documents. Software Titrate-5.0 The titrator is controlled using the Titrate-5.0 software package, which is supplied in three types of configurations with different levels of functionality: basic equipment of the titrator Titrate Base. expanded equipment for the Titrate Deluxe titrator. professional equipment for the titrator Titrate Pro. The basic package of the Titrate Base software package is supplied with the ATP-02 titrator. Titrate Deluxe and Titrate Pro packages are available for an additional fee. The Titrate software package is a modern software product in Russian with great analytical capabilities and a convenient, user-friendly interface built on the principle of intuitiveness. Using this program, the device is fully controlled during the measurement process, data is processed, the metrological characteristics of the results obtained are calculated, information is stored and measurement protocols are printed. Depending on the task being solved and the qualifications of the operator, the Titrate program can operate in two modes - “Analyzer” and “Researcher”. The “Analyzer” mode implements measurements in strict accordance with the methodology and regulatory document with full automation of the process of obtaining the result. The “Start” command automatically causes: measurement and data processing; report generation; saving the measurement protocol in the database; printing of the measurement protocol in accordance with the requirements of the regulatory document. This mode is most productively used for daily measurements and allows you to minimize errors and errors introduced by the operator. The program guides the operator through the entire procedure, displays necessary hints if necessary, and informs about possible errors. In this mode it is also possible to use target programs included in the complex. In the “Explorer” mode, all the enormous possibilities of the program open up, such as: creating your own measurement techniques; adjustment of existing methods; development of new and modification of existing mechanisms for processing measurement results; changes in settlement mechanisms and user interfaces; calibration and input of parameters of new electrodes; development of new and adjustment of existing protocols and printed forms; implementation of all research functions of the complex. Methods and techniques developed in the “Researcher” mode can be further used in the “Analyzer” mode. Also, the ATP-02 titrator is supplied with target programs for performing measurements for special tasks according to specific standards (GOSTs). Manba: https://www.nv-lab.ru/catalog_info.php?ID=936
- Parameter: ATP-02
- Burette capacity, cm3: 20; 50
- Readout resolution during dosing, ml: 0.001
- Measuring range: molar concentration of substances, mol/dm3 mass concentration of substances, mg/dm3 mass fraction of substances, % pH value, units. pH EMF, mV temperature, °C: from 10-6 to 0.1 from 0.001 to 106 from 0.0001 to 100 from 0 to 14 from −2000 to +2000 from −50 to +150
- Limits of permissible relative measurement error: molar concentration, % mass fraction of substances, % pH value, units. pH: ±2 ±2 ±0.03
- Limit of permissible value of the relative standard deviation of the random component of the error, %: 1.0
- Power consumption (without PC), no more, VA: 40
- Power supply, V/Hz: 220±22/50
- Overall dimensions (length x width x height), mm: 210×220×310
- Weight, no more, kg: 5