Audio equipment
Event adapter AD22B
Eventa AD22B is a dual-channel Bluetooth input adapter with Dante support. It transmits audio based on Dante Ultimo 2x2. AD22B converts two-channel Bluetooth audio signal into two-channel Dante digital audio signal, and then transmits the audio signal to the receiving end via the Dante network. The adapter supports local power via the USB-C port and PoE function.
Price on request
- Input: Dual Channel Bluetooth Audio
- Output: Dante® 2CH digital audio
- Control Method: Dante® Controller
- Audio Latency: Configurable Dante® Device Latency (Supports 1, 2, or 5 ms, configurable via Dante® controller)
- Bluetooth input: Digital audio input, PCM 2K 44.1K-192kHz 16/24bit
- DANTE output: Digital audio output, PCM 2K 48 kHz 16/24 bit
- Input impedance: -
- Line Input Level (Maximum): -
- Frequency response: 20 Hz – 20 kHz (-/+0 dB)
- Dynamic Range: >100 dB, 1 kHzA-weighted
- Audio signal-to-noise ratio: >100dB, 1kHzA-weighted
- Audio THD+N: <0.01% at 0 dBV, 1 kHz
- Transmission distance: 100 meters (CAT6/6A/7)
- Electrostatic discharge protection: IEC 61000-4-2: ±8 kV (air discharge) ±4 kV (contact discharge)
- Input: POWER (USB-C port, 12-pin female) x 1 Bluetooth input (wireless) x 1
- Output: DANTE (RJ45 connector, PoE) x 1
- Others: RESET button (system reset button) x 1 PAIR button x 1 STATUS LED x 1
- USB input: 5V/500mA
- PoE input: PoE IEEE802.3af Class 0
- Power Consumption: 0.65W (Max)
- Operating temperature: 0°C to 40°C
- Storage temperature: -20 ~ 60°C
- Relative Humidity: 20% to 80% RH (non-condensing)
- Housing: Plastic
- Color: Black
- Dimensions (W x D x H): 115 x 40 x 28 mm
- Weight: 93 g