3D scanner ScanTech AXE-G7
AX G7 scanner with built-in photogrammetry system, developed by Scantech Co ltd. for scanning medium and large objects with high speed and accuracy. Due to the significantly increased scanning field of the scanner, scanning is performed much faster than with scanners of the HScan and Prince lines. It was possible to increase the capture field thanks to the increased convergence angle of the cameras. The increased capture area also allows you to significantly reduce the consumption of positional reflective markers (tags) during scanning. Due to the built-in photogrammetry system, AXE-G7 allows you to scan large objects with minimal error without the use of additional devices. Great for scanning cars, large molds and other parts from 20 cm to 10 meters. It is used in the mining and other extractive industries, as well as in the development of large component parts and parts for large machines, for aircraft and railway transport. The scanner is included in the register of measuring instruments of the Russian Federation.
- Light source: 7 x 7 red cross laser lines + 1 single line scanning mode
- Scanning grooves, holes, undercuts, etc.: supported
- Measurement speed: 800,000 points per second
- Laser class: CLASS II (safe for eyes)
- Resolution: 0.1 mm
- Accuracy: up to 0.02mm
- Volumetric accuracy: 0.02mm + 0.035mm/m
- Scanner capture area: 550mm x 500mm
- Distance: 450mm
- Depth of field: 500mm
- Depth of field (photogrammetry systems): 2500mm
- Survey area (photogrammetry systems): 2500mm x 3000mm
- Output format: .ply, ,xyz, .dae, .fbx, .ma, .obj, .asc, .stl, .igs, .wrl
- Operating temperature: From -10 to + 40 C
- Connection interface: USB 3.0